Elastic Constant of Natural Fiber Reinforced Composites of Borassus Fleblifier at Different Temperature
Present investigation is an attempt to develop a good quality natural fiber reinforced composite from different parts of Borassus flablifier. Ultrasonic velocity is related to some elastic constant. Ultrasonic interferometer has been employed for measurement of elasticity of different sample. Composite made up of stem material has higher values of elastic constant compared to other part of the tree. Stem composite has higher elastic properties while leaf composite has some lower values. Material may apply for the development of composites of the different strength using Borassus fleblifier fibers.
Studies on Mechanical Performance of Biofibre/Glass Reinforced Polyester Hybrid
Composites, Composites Science and Technology, 2003, 63, 1377 – 1385.
2. M Joshi and S.W. Ali (1998). Indian j. Fibre text res. 34, 295. 2009
3. Batra S.K. Handbook of fibre chemistry, LewinM. And E.M. (eds) Marcel Deccar, pp
4. D. Chandramohan and J. Bharanichandra. Natural fiber reinforced polymer composites
for automobile accessories. American journal of environmental Science, 2013, 9(6); 494-
5. Torres, F.G. and Diaz, R.M. (2004). Morphological characterization of Natural fiber
Reinforce Thermoplastics (NFRTP) Processed By Extrusion, Compression and Rotational
Moulding: Polymers and Polymer Composites, Vol. 12, No.8 pp. 705-718
6. Wang, M., Porter, D., and Bonfield, W., (1994); Processing Characterization and
Evaluation of Hydroxyapatite reinforced polyethene composites; British Ceramic
transaction vol.93 no.3 pp 91-95,
7. Phadke, S., Ujjainkar, Surbhi, (2017). Determination of Elastic constant of Borassus
fleblifier Leaf by Ultrasound; The Sij transaction of industrial financial and business
management (IFBM) vol. 5, no. 2, 12-32.
8. J. Sahari and S.M. Sapuan, Natural fibre reinforced biodegradable polymer composites,
Rev.Adv.Mater. Sci., 2011, 30, 166-174.
9. R.S. Taufik, Nurul Farah Adibah M., M.R. Muhamad and H. Hasib. Feasibility study of
natural fiber composite material for engineering application. Journal of mechanical
engineering and science (JMES), 2014, 6, pp 940-948
10. Sneha H. Dhoria, M. Vijay, Investigation of mechanical properties of borassus flabllifer
fiber reinforced polymer composites, ISSN-2349-5162, vol.2 issue12 Dec.2015.
11. J. Vignesh, C.M. Selvam, Experimental evaluation of wood dust particulate
reinforced polymer composites/ IRACST-Engineering Science and technology: an
international journal, ISSN: 2250-3498 vol. 5, no.4.Aug 2015.
12. A Kiran Kumar A., Bala subramaniam, K., Ganeshan, N., and Ravi Kumar, B.,
Ultrasonic measurements of the elastic modulli of Hybrid natural short fiber reinforced
green composites, 14th Asian Pacific conference on Non Destructive
Testing (APCNDT), Mumbai 2013.
13. J. Vignesh and C.M. Selvam. Experimental evaluation of wood dust particulate
reinforced polymer composites. Engineering science and technology: An intenational
Journal (ESTIJ), 2015 5(4).
14. A. Mishra. Frictional characterization of teak wood dust-filled epoxy composites.
Advances in production engineering & Management. 9(3), pp 111-118.
15. P.V. Senthiil, Aakash Sirsshti. Studies on Material and Mechanical properties of Natural
fiber reinforced composites. The international Journal of engineering and science (IJES),
2014, 3(11), 18-27
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Copyrights for articles published in International Journal of Innovative Knowledge Concepts are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.