An Approach to Design of Knuckle Joint Using Genetic Algorithm Optimization Technique

  • Arvind Gothwal Department of Mechanical Engineering, SPIT Piludara, Mehsana,Gujarat 384001, India
Keywords: Knuckler Joint, Genetic Algorithm, Engineering Design, MATLAB

Abstract

 This research is related to optimum design of Knuckle joint because there are many constraint or failure possibilities so we try to make correlations for other dimensions related to diameter of road. This study makes easy to design a Knuckle joint with the help of correlations for minimum material requirement or minimum volume under consideration of all failure possibilities.

References

[1] Mansukh Gorasiya, “ Weight and Volume Optimization of Helical Gear Produced by Hobbing Process using Genetic Algorithm on Cast Iron”, Journal of Research in Mechanical Engineering and Applied Mechanics Volume 3 Issue 2
[2] Yallamti Murali Mohan1 ,T.Seshaiah2 Yallamti Murali Mohan, T.Seshaiah, “Spur Gear Optimization by Using Genetic Algorithm”, International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 www.ijera.com Vol. 2, Issue 1, Jan-Feb. 2012, pp. 311-318
[3] Muthukumaran V., R.Rajmurugan, V.K.Ram kumar, “Cantilever Beam and Torsion Rod Design Optimization Using Genetic Algorithm”, International Journal of Innovative Research in Science, Engineering and Technology Volume 3, Special Issue 3, March 2014
[4] Mogal Y.K., D.D.Palande, V.D.Wakchaure, “Optimization of Gear Pairs Using Genetic Algorithm”, National Symposium on engineering and Research, IOSR Journal of Engineering (IOSRJEN) ISSN: 2250-3021 ISBN: 2878-8719 PP 22-26
[5] Navle M.S., Dr. A. V. Damale, “Weight Optimization of the Gear Train – A Review”,International Advanced Research Journal in Science, Engineering and Technology 2nd International Conference on Advances in Mechanical Engineering(ICAME-2016) Amrutvahini College of Engineering, Sangamner Vol. 3, Special Issue 1, March 2016
[6] Appala G. Naidu, T.N. Charyulu, S.C.V.Ramanamurthy Naidu, M.Satyanarayana, “Optimization of Flywheel Weight using Genetic Algorithm” ,International Journal of Science, Engineering and Technology Research (IJSETR) Volume 2, Issue 3, March 2013
[7] Mansukh V. Gorasiya, Navnit J. Patel, Hemanshu D. Joshi, Ravindra P. Rathod, “A Review on Optimization of Helical Gear Pair using Genetic Algorithm to Analyze the Performance Characteristics” , IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 11, 2017 | ISSN (online): 2321-0613
[8] Razvan Cazacu, Lucian Grama, Mihai Dan Groza, “Shape and Size Optimization of A Gearbox Bracket Using Genetic Algorithms”, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Issue #1, May 2015
Published
2018-06-27
Section
Articles